iStore 270L Heat Pump Hot Water System

iStore's efficiency can reduce your water bills by a whopping 70%

The iStore  reduces hot water heating consumption by two thirds from conventional electric or gas storage systems, while reducing CO2 emmissions by 4 tonnes.

Installing an iStore could save you up to $1,000* per year on your energy bills.

How iStore works

1. A fan draws in air, containing heat energy, across the evaporator
2. The evaporator turns the liquid refrigerant into a gas
3. The compressor pressurises the refrigerant into a hot gas
4. The hot gas inside the condenser coil heats the water inside the coil-wrapped tank
5. The refrigerant reverts back to a liquid after heating the water and continues to the evaporator for the process to start again
6. The cycle continues until the set target temperature is achieved.
7. As water is used in the home, the cycle will restart once the temperature in the tank has dropped below 45 °C

Product Specifications

Heating capacity	kW	3.4
Water tank capacity	L	270 L
Power input	kW	0.94
Running current	A	3.97
Power supply	240V	~/50H z
Rated outlet water temp.	°C	60
Air volume	m ³/ h	450
Noise @ 1 m	dB (A)	46.6
Water inlet / outlet size	BSB / mm	20
Back up element	kW	1.5
IP Rating		X4

Dimensions

Height	1955 mm
Diameter	640 mm
Height to water inlet	99 mm
Height to water outlet	1194 mm
Hot water condensation
Height to PTR valve.
Height to anode	1094 mm
Net weight	157 kg

Warranty Information

Cylinder	5 years
Refrigeration & electrical	5 years
Valves or Accessories	1 year

Start saving $$$ on your energy bills

book now

iStore Heat Pumps

The iStore 270 litre heat pump is a leading hot water solution from a brand known for its innovative technology. iStore heat pumps harness renewable energy to create hot water.

iStore hot water systems use technology that captures and transfers thermal energy from the air into water to heat it. iStore heat pumps can save you up to 70% in energy usage compared to other systems.

These systems can also be integrated with your solar panels, with programmable timers to take advantage of rooftop solar power or off-peak power. iStore heat pumps can be programmed to best meet the peaks and flows of your daily household needs.

Benefits of iStore Heat Pumps

There are many reasons why you should consider installing one of our iStore hot water systems. Here are some of them:

• Easy to Install – One of the best things about iStore hot water systems is that they are relatively simple to install. You can replace existing electric or gas storage systems with heat pumps without additional piping.
• Low Operation Expenses – It is less expensive to run one of these heat pumps than gas and electric systems. Also, you can save more if you integrate solar panels with your iStore heat pump system.
• Multi-Mode Programming – It has multi-mode programming for every hot water requirement of your home.
• Multi-Tap Pressure – A single heat pump system can provide adequate pressure for multiple taps and outlets.
• Features Dual Anodes – iStore heat pumps have dual anodes for better durability.
• Quiet Operation – iStore heat pumps generate very little noise.

Contact Hilton Plumbing for more information about our iStore hot water systems or any of our water heating solutions. We have in-depth knowledge of iStore heat pumps and all of the products we stock, and are more than happy to assist you with your questions.