After a long day, the last thing you want to find is no hot water when you turn on the faucet. The inconvenience of not having hot water can be a real annoyance, especially if you are in a hurry.
There are several different causes that may lead to this scenario, and they may not be easy to detect, unless you’re a professional. A professional will determine if your problem can be fixed or if you need a complete replacement. If you’re experiencing no hot water in Perth, Hilton Plumbing can diagnose and fix the issue fast.
Reasons There’s No Hot Water
Water heater problems can be complicated if you do not know what to look for. While you might not be able to spot the problem right away, the following are a few reasons you may have no hot water.
Thermostat Malfunction
Like most heating appliances, water heaters are controlled by a thermostat. If you are experiencing no hot water, check the temperature indicator of your water heater.
The Water Heater Has Sediment Build Up
Water continuously flows through these water heaters, bringing sediment and other debris. Because grime and sediment are heavier than water and tend to sink to the bottom, they can accumulate in the tank’s bottom over time. This accumulation can affect the water heater’s efficiency and, if left untreated, can lead to your water heater completely breaking down.
The Unit is Old and Needs Replacing
Like any household appliance, hot water systems don’t last forever. Over time parts of your water heater can wear out, causing you to lose access to hot water quickly. This could mean your water heater has passed its expected lifespan and may not be worth repairing. Whenever a water heater reaches the end of its useful life, it is unlikely to produce hot water as efficiently as it once did. Before you write it off, ask a professional to check it out to determine if there is still some life left.
You May Not Have the Appropriate Tank Size
If you have a large household, you’re sure to run out of hot water quickly if your tank is too small. And if you are running out of water quickly, it is very unlikely that your water heater is energy efficient. Inspect the capacity of your water heater to see if it can handle your hot water needs. If it does not meet the demands of your household, it may be time to replace it with a larger one.
A Leak in the Tank
When a home’s water heater leaks, the consequences are frequently severe. Water damage can extend to floors, walls and your belongings. If you are unable to detect where the leak is coming from, seek advice from a plumber immediately so that the problem can be remedied swiftly.
How Can I Ensure I Always Have Hot Water?
If you take care of your water heater, it will take care of you. These are a few tips on how to avoid having no hot water in Perth.
- When installing your water heater, ensure you hire a professional plumber to complete the installation. A water heater that is not installed properly can be dangerous and ineffective.
- Ensure your water heater is regularly maintained. Well maintained units have a much longer lifespan than those that aren’t looked after.
- Before you buy a new unit, verify the tank capacity is large enough for your household. A tank that is too small means you will regularly have no hot water.
For those experiencing no hot water, Perth residents and businesses can rely on Hilton Plumbing. We’re here to assist no matter how big or small the problem. Contact our experienced and expert team today!